Step 1: Make a black hole.
Step 2: Make a wheel and connect it like so:
(You can connect more then 2, because there is a chance you can make more then 2 if you connect all of them.)
Step 3: Make it look like one wheel.
Step 4: Take all the water rods, so you will not have a black hole.
Step 5: Start and stop. (Without the black hole)
Step 6: Delete 1 circle.
Step 7: Start and stop. (Without the black hole)
Congratulations, you made 1-5 pins.
Works always (tell me if it doesn't).
Method 2:
Step 1: Make a/n un/powered ball and attach all the sides together.
Example :
Step 2: Move the part you connected together to the middle.
Example :
Step 3: Remove all the rods except the middle one.
Example :
Also, if you don't want the ball to be on the pin just delete it.
Doesn't work for everyone.
Method 3:
Fast and works for most people.
Step 1: Make this (the water rod has to be under the wheel).
Step 2: Move the wheel so it is like so
.Step 3: Start and stop.
Step 4: Remove the wheel.
Three ways to make pins.
