## Making Pins

Come talk about the game, your Contraptions, and your solutions!

### Making Pins

Method 1:

Step 1: Make a black hole.

Step 2: Make a wheel and connect it like so:

(You can connect more then 2, because there is a chance you can make more then 2 if you connect all of them.)
Step 3: Make it look like one wheel.

Step 4: Take all the water rods, so you will not have a black hole.
Step 5: Start and stop. (Without the black hole)
Step 6: Delete 1 circle.
Step 7: Start and stop. (Without the black hole)
Congratulations, you made 1-5 pins.
Works always (tell me if it doesn't).

Method 2:

Step 1: Make a/n un/powered ball and attach all the sides together.
Example :

Step 2: Move the part you connected together to the middle.
Example :

Step 3: Remove all the rods except the middle one.
Example :

Also, if you don't want the ball to be on the pin just delete it.

Doesn't work for everyone.

Method 3:

Fast and works for most people.

Step 1: Make this (the water rod has to be under the wheel).

Step 2: Move the wheel so it is like so
.

Step 3: Start and stop.

Step 4: Remove the wheel.

Three ways to make pins.
Last edited by joeysjj on Wed Jul 08, 2009 2:23 pm, edited 7 times in total.

joeysjj

Posts: 355
Joined: Wed Aug 20, 2008 10:14 am
Location: „˙zʎxʍʌnʇsɹbdouɯןʞɾıɥƃɟǝpǝɔqɐ„' uʍop ǝpısdn ʇǝqɐɥdןɐ ʎɯ ƃuıʎɐs

### Re: Making Pins

This is different from the last one.

It actually works

JayJSE2

Posts: 116
Joined: Sun Oct 26, 2008 9:02 am

### Re: Making Pins

this should be called: making pins part 2

jetstone644

Posts: 594
Joined: Sun Nov 23, 2008 4:56 pm
Location: In a basement.....hiding

### Re: Making Pins

JayJSE2 wrote:
This is different from the last one.

It actually works

Sometimes the other one works, they aren't 100% chances.

joeysjj

Posts: 355
Joined: Wed Aug 20, 2008 10:14 am
Location: „˙zʎxʍʌnʇsɹbdouɯןʞɾıɥƃɟǝpǝɔqɐ„' uʍop ǝpısdn ʇǝqɐɥdןɐ ʎɯ ƃuıʎɐs

### Re: Making Pins

It really works.

Foro

Posts: 1200
Joined: Wed Oct 15, 2008 1:52 pm
Location: We didn't start the flame war, Peeps were hatin' on it fore I left my comment

### Re: Making Pins

Thanks, but Usually when I do the all joint's thing it only makes 1 or 2 out of 5 pins, BUT ITS BETTER THAN NONE! :P

Hero88go

Posts: 1930
Joined: Thu Aug 21, 2008 3:29 pm
Location: In Sk's Hair.

### Re: Making Pins

i made 2/5 which makes it.........40% accurate

jetstone644

Posts: 594
Joined: Sun Nov 23, 2008 4:56 pm
Location: In a basement.....hiding

### Re: Making Pins

Well if you only make 1, you will get 100% accurate.

joeysjj

Posts: 355
Joined: Wed Aug 20, 2008 10:14 am
Location: „˙zʎxʍʌnʇsɹbdouɯןʞɾıɥƃɟǝpǝɔqɐ„' uʍop ǝpısdn ʇǝqɐɥdןɐ ʎɯ ƃuıʎɐs

### Re: Making Pins

dang awesome it works
here is what I made with it
http://FantasticContraption.com/?designId=8165317

VERYDUMBNAME

Posts: 1503
Joined: Fri Oct 24, 2008 12:52 pm
Location: uʍop ǝpısdn sı uǝǝɹɔs ɹnoʎ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

### Re: Making Pins

Yeah, Thanks again

Hero88go

Posts: 1930
Joined: Thu Aug 21, 2008 3:29 pm
Location: In Sk's Hair.

### Re: Making Pins

You are welcome.

Who else did i help?

joeysjj

Posts: 355
Joined: Wed Aug 20, 2008 10:14 am
Location: „˙zʎxʍʌnʇsɹbdouɯןʞɾıɥƃɟǝpǝɔqɐ„' uʍop ǝpısdn ʇǝqɐɥdןɐ ʎɯ ƃuıʎɐs

### Re: Making Pins

Wow.... this is very mezmerizing: http://FantasticContraption.com/?designId=8211028

BJSwimmer

Posts: 1502
Joined: Wed Mar 11, 2009 9:26 pm
Location: Las Vegas, NV

### Re: Making Pins

I agree.

Sorry In advance that my post is so short,
but now it isn't. Paradoxical.

joeysjj

Posts: 355
Joined: Wed Aug 20, 2008 10:14 am
Location: „˙zʎxʍʌnʇsɹbdouɯןʞɾıɥƃɟǝpǝɔqɐ„' uʍop ǝpısdn ʇǝqɐɥdןɐ ʎɯ ƃuıʎɐs

### Re: Making Pins

Agreed.
This thread should be a sticky

Get it? Pin, Sticky?

Hero88go

Posts: 1930
Joined: Thu Aug 21, 2008 3:29 pm
Location: In Sk's Hair.

### Re: Making Pins

Umm...

Sure... Funny.

I get it.

joeysjj

Posts: 355
Joined: Wed Aug 20, 2008 10:14 am
Location: „˙zʎxʍʌnʇsɹbdouɯןʞɾıɥƃɟǝpǝɔqɐ„' uʍop ǝpısdn ʇǝqɐɥdןɐ ʎɯ ƃuıʎɐs

### Re: Making Pins

Hero88go wrote:Agreed.
This thread should be a sticky

Get it? Pin, Sticky?
\

*Ba dum, chich*

RockstarM

Posts: 1517
Joined: Fri Sep 26, 2008 8:21 pm
Location: NewZealand of course! You crazy Americans! :P

### Re: Making Pins

Sorry, I don't get how to make this pin of yours, could you explain the steps in more detail?
Thanks

RockstarM

Posts: 1517
Joined: Fri Sep 26, 2008 8:21 pm
Location: NewZealand of course! You crazy Americans! :P

### Re: Making Pins

sanderlennart

Posts: 713
Joined: Fri Oct 31, 2008 11:44 am
Location: http://fantasticcontraption.com/game/Contraption.swf

### Re: Making Pins

sanderlennart wrote:Removed wheel and only 1 worked http://FantasticContraption.com/?designId=8304895

I fooled around with it a little and something very strange occurred. ^_^

http://FantasticContraption.com/?designId=8305596
BluBBen

Posts: 83
Joined: Wed Jul 30, 2008 8:34 pm

### Re: Making Pins

BluBBen wrote:
sanderlennart wrote:Removed wheel and only 1 worked http://FantasticContraption.com/?designId=8304895

I fooled around with it a little and something very strange occurred. ^_^

http://FantasticContraption.com/?designId=8305596

it's simple, the pins hold it up and when 2 rods are really close to each other they kinda float, see? http://FantasticContraption.com/?designId=8306198
Enwervionz

Posts: 217
Joined: Fri May 08, 2009 7:53 am

Next