Step 1: Make a black hole.
Step 2: Make a wheel and connect it like so:
(You can connect more then 2, because there is a chance you can make more then 2 if you connect all of them.)
Step 3: Make it look like one wheel.
Step 4: Take all the water rods, so you will not have a black hole.
Step 5: Start and stop. (Without the black hole)
Step 6: Delete 1 circle.
Step 7: Start and stop. (Without the black hole)
Congratulations, you made 1-5 pins.
Works always (tell me if it doesn't).
Step 1: Make a/n un/powered ball and attach all the sides together.
Step 2: Move the part you connected together to the middle.
Step 3: Remove all the rods except the middle one.
Also, if you don't want the ball to be on the pin just delete it.
Doesn't work for everyone.
Fast and works for most people.
Step 1: Make this (the water rod has to be under the wheel).
Step 2: Move the wheel so it is like so
Step 3: Start and stop.
Step 4: Remove the wheel.
Three ways to make pins.