The Awesome and Amazing FC Collab Thread!

[zhyrek]

Added one that should be an interesting challenge

Called Bridge the Gap

[jdccdj1]

http://www.fantasticcontraption.com/?designId=11583570 lol
edit: but on a serious note, someone hook a monorail up on this bad boy or mabey a few catas http://www.fantasticcontraption.com/?designId=11583588

The force is strong with this one...but using more practical ideas he must....

http://www.fantasticcontraption.com/?designId=11584525 solve for tricky wicky..too bad it was my level anyway :P




Need more levels :D

well, i see somebody around here has their big boy pants on...THAT was an excellent solve, rlbabits!!!

[rlbabits]

Thank you jdccdj

well whoever is collabin' on futility your efforts will be futile if you don't hurry >:D

[Jyo]

put a hold on that babits; i need to leave a mark on this thread too

think we can grab the rectangle in less than 20 pieces?

http://www.fantasticcontraption.com/?designId=11586046

edit: http://www.fantasticcontraption.com/?designId=11586060

edit2: http://www.fantasticcontraption.com/?designId=11586072 shaved off afew pieces

[ID36]

Workable? http://www.fantasticcontraption.com/?designId=11586797

[jdccdj1]

put a hold on that babits; i need to leave a mark on this thread too

think we can grab the rectangle in less than 20 pieces?

http://www.fantasticcontraption.com/?designId=11586046

edit: http://www.fantasticcontraption.com/?designId=11586060

edit2: http://www.fantasticcontraption.com/?designId=11586072 shaved off afew pieces

hey jyo-

here's the rectangle delivered in 14 pieces: http://www.fantasticcontraption.com/?designId=11587408

[rlbabits]

well if anyone wants to tweak these be my guest..i am done for a while

Bridge the gap:
really fantastic and a very doable level lol at first i thought it was impossible...
http://www.fantasticcontraption.com/?designId=11587854 best
http://www.fantasticcontraption.com/?designId=11587848 the lift needs to stay at the top longer- and the idea is to have that brown rope as a slope for the goal ball, so it does not have to find a way over the pink wheel.
proof from an earlier design that the lift can stay at the top: http://www.fantasticcontraption.com/?designId=11587399

Futility:
the prob with this is i broke the cardinal rule for tweaking- all the mechanisms are built on one base, so when i tweak one part the rest goes to hell..if someone could tweak this to a solve i would worship them as a tweaker: http://www.fantasticcontraption.com/?designId=11585915 jyo's idea is more likley to get a solve but this one is a bit closer- maybe a combination of them?

[Jyo]

really nice job on bridge the gap babits.

also, holy hell.
yur crazy to try to pult that rectangle in there.
the precision and power we need to pull that off is just mad lolz

[rianbay812...2]

babits you're talking about two events that would take hours to tweak if they were separate contraptions. I like Jyo's idea.

Macrocosmos idea: http://www.fantasticcontraption.com/?designId=11588433 Rebuild skitters' contraption in there
I have some experience working with skitters' machanism http://www.fantasticcontraption.com/?designId=11588160 Ill see what I can come up with

[rlbabits]

yea i agree rianbay that's exactly what i said >.>

just figured if anyone wanted to do a tweakfest i'd throw it out there. jyo's idea is far better but the rectangle conveyer needs some work.
but i did find out with about 2 minutes of work and a few tweaks i got this: http://www.fantasticcontraption.com/?designId=11588498 its not as hard to tweak as i thought.

also i thought for macrocosmos you could do this: http://www.fantasticcontraption.com/?designId=11588512 i think it may be less tweaky, and about the same pcs. as the skitters design

[lord_hamybal]

babits you're talking about two events that would take hours to tweak if they were separate contraptions. I like Jyo's idea.

Macrocosmos idea: http://www.fantasticcontraption.com/?designId=11588433 Rebuild skitters' contraption in there
I have some experience working with skitters' machanism http://www.fantasticcontraption.com/?designId=11588160 Ill see what I can come up with

that first design is still mine ? not skitters

[rianbay812...3]

Yeah I took out your catapult and was suggesting we build the skitters mechanism in place of it.

Don't have everything in place QUITE yet...
But here's what I have http://www.fantasticcontraption.com/?designId=11592074
All of remy's stuff is working (and not tweaky AT ALL) but I need someone to figure out what to do about the flying brown weight (on the left) that mess everything up.

[lord_hamybal]

if i can get this it should be easier for your end
http://www.fantasticcontraption.com/?designId=115921313

need some help
http://www.fantasticcontraption.com/?designId=11592141

now in the bag
http://www.fantasticcontraption.com/?designId=11592149

so close
http://www.fantasticcontraption.com/?designId=11592202


3/4 up then screws
http://www.fantasticcontraption.com/?designId=11592211

[rlbabits]

could be a good level for this thread: http://www.fantasticcontraption.com/?levelId=591015 looks interesting, played around with it a bit, seems solvable...

[jdelgado06]

heh, I wonder if you could get a lucky bounce 1-3pc solve

http://www.fantasticcontraption.com/?designId=11599033


and if not a lucky bounce, something like this should do it
http://www.fantasticcontraption.com/?designId=11599041

[jdccdj1]

no lucky bounce for me

http://www.fantasticcontraption.com/?designId=11599147

EDIT: used part of jdel's 2nd design and got it close: http://www.fantasticcontraption.com/?designId=11599220

[uuuiiiooop]

I got a solve but it froze at "Working..." when I tried to save D:

http://www.fantasticcontraption.com/?designId=11599600

[jdccdj1]

I got a solve but it froze at "Working..." when I tried to save D:

http://www.fantasticcontraption.com/?designId=11599600

hey uuuiiiooop, i only get the work/goal boxes when i try to view your design...think you could re-save it and post it again...might be able to see it,

EDIT: thanks uuuiiiooop....very nice solve!

[uuuiiiooop]

I got a solve but it froze at "Working..." when I tried to save D:

http://www.fantasticcontraption.com/?designId=11599600

hey uuuiiiooop, i only get the work/goal boxes when i try to view your design...think you could re-save it and post it again...might be able to see it,

uh oh, me too... I guess it got messed up when it froze for like an hour while saving lol... Well, I guess I'll try to beat it again

There we go, this is pretty much what I had last time too: http://www.fantasticcontraption.com/?designId=11600005

[rianbay812...3]

Does anyone think this is possible?
http://www.fantasticcontraption.com/?levelId=591147

Sorta on the same idea as remy's Hall Way where except it's with two statics (so harder). The big ball has to come out of the maze then the smaller one through the same way